|
| Your | ||
| Table 1: Front Panel | |||
|
|
|
| |
# | Feature | Function |
| |
1 | POWER Switch | Illuminated switch for turning the unit ON or OFF |
| |
2 | STANDARD LEDs | Indicates1 the input video standard2, lighting the appropriate LED |
| |
3 | INPUT Button | Press to choose the input format3 |
| |
4 | INPUT LEDs | Light the specific INPUT chosen via the INPUT button |
| |
5 | OUTPUT Button | Press to select the output standard on CV and YC outputs |
| |
6 | OUTPUT LEDs | Light the specific OUTPUT chosen via the OUTPUT button |
| |
7 | COMPONENT OUT | Press to select the output4 format on the component BNC connectors |
| |
| Button |
|
| |
8 | COMPONENT OUT LEDs | Light the specific COMPONENT OUT chosen via the COMPONENT OUT |
| |
|
| button |
| |
9 | Lower CONTROL LED | Selects the function printed under the lit ProAmp button |
| |
10 | Upper CONTROL LED | Selects the function printed above the lit ProAmp button |
| |
11 | Y CONTROL Button |
|
| |
|
|
|
| |
| BRIGHT Button |
|
| |
|
|
|
| |
12 | U CONTROL Button | Press the appropriate button once or twice (until the upper/lower LED is lit) |
| |
| CONTRAST Button |
| ||
| to select control of the Y / BRIGHTNESS / U / CONTRAST / V / |
| ||
|
| SATURATION / SHARP / HUE5. Adjust using the + and – buttons |
| |
13 | V CONTROL Button | |||
|
| |||
| SATURATION Button |
|
| |
|
|
|
| |
14 | SHARP CONTROL Button |
|
| |
| HUE Button |
|
| |
|
|
|
| |
15 | + Button | Press to increase the level6 | ||
16 | - Button | Press to decrease the level6 |
| |
17 | Displays data when selecting a CONTROL button. After powering up the |
| ||
|
| machine, the firmware version number displays briefly for versions higher |
| |
|
| than 1.0 |
| |
18 | PANEL LOCK LED | Lights when the panel is locked (blinks after pressing a button while the |
| |
|
| panel is locked) |
| |
19 | PANEL LOCK Button | Disengages the front panel buttons |
|
1 When the
2 PAL (B/D/G/H/I/N), NTSC(3.58), SECAM, PAL (M/Nc/60) and NTSC (4.48)
3 CV, YC, YUV, RGsB, or RGBS
4 YUV, RGsB, or RGBS
5 Note that this function is not applicable to all standards
6 Operational only when the
4 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |