10 SPK-C612 - Installing the SPK-C612 C los ed -back Ceiling Speakers
11. Install the grilles to the speakers:
Push the grille fastener int o the hole in front of the baffle
Press the grille into place until the front of the grille is flush with the rim
of the baffle
Check that the grille is securely seated
To remove the grille, insert two bent paper clips into the holes in the
grille and carefull y pull it down. Repeat t his around the perim eter of
the grille until it is completely rem oved.
5.4 Painting the Speaker
You can paint the speakers before or after they are installed.
When painting before instal l ation:
• Clean the rim and grille with mineral spirits or other light solvent that is
unlikely to damage the surface
• Spray with color by holding the spray can at an angle of 45°
When spraying the grille, take care not to clog the holes in the grille
as this will greatly reduce the sound quality of the speakers.
When painting after i nstallation:
• Use the circle that you cut out of the template as a paint mask
• After you finish painti ng, remove the paint mask
i
i