Kramer Electronics SV-551

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Defining the SV-551 SummitView™ Processor/Switcher

# Feature Function

INPUT Buttons

(used for testing)

VIDEO 1 Press to select the video source 1

5 VIDEO 2 Press to select the video source 2

6 PC 1 Press to select the PC 1 source

7 PC 2 Press to select the PC 2 source

8 PC 3 Press to select the PC 3 source

9 PROGRAM Connector Connect to a computer for configuration of the unit (a USB cable is

provided with the Controller)

10 ETHERNET Connector Connects to the PC or other Controller through computer networking,

for control and configuration of the unit. Default IP settings:

Address 192.168.1.39, port 50000, subnet mask 255.255.255.0

11 K-NET1PIN GND is for the Ground connection;

PIN B (-) and PIN A (+) are for RS-485,

and PIN +12V is for powering the unit.

For details of how to connect K-NET, see

Connector

Figure 14

12 LINE OUT Terminal Block Connect to an external audio amplifier

13 TERM DIP-switches DIP-switches for line termination of the unit (DIP-switch 1 is for KNET,

DIP-switch 2 is for RS-485)

14 RS-232 DB 9M Port Connects to the projector for projector control

15 PROJECTOR 15-pin HD

connector

Connects to the projector

16 SPKR Terminal Block Connect to the left and right speakers

17 AUX IN Terminal Block Connect to an additional audio source for mixing it with the audio line

level input (talk over)

18 10V VOL Terminal Block Connect to an external potentiometer on a wall plate

to adjust the

volume of the speakers

RELAY Terminal Block Connect to a room item (such as lighting, screen settings, blinds, and

so on)

20 RS-232 Terminal Block Connect to the RS-232 connector on the A/V equipment or a PC or other

Serial Controller

21 RS-485 Terminal Block Connect to the RS-485 detachable terminal block on a switcher or PC

22 IR OUT Terminal Block Control a machine via an IR Emitter

23 CV RCA Connector Connect to the composite video 1 input of the projector

24 CV RCA Connector Connect to the composite video 2 input of the projector

25 s-Video 4p Connector Connect to the s-Video input of the projector

26 PR RCA Connector

27 Y RCA Connector Connect to the component video input of the projector

28 PB RCA Connector

29 VIDEO 1 RJ-45 Connector Connect to the video 1 source via the CAT 5 socket on the rear of the

SV-302 or SV-303

1 K-NET is a proprietary Kramer protocol for interconnecting Kramer units

2 For example, the RC-63A