KRAMER: SIMPLE CREATIVE TECHNOLOGY
Customizing the Controllers' Buttons and Labels
30
Figure 16: High/Low Forward, Side, and Over Obstruction Reach Limit Requirements

7 Customizing the Controllers' Buttons and Labels

This section describes the backlit buttons and the button labels sheet.
7.1 Backlit Buttons
The RC-63DL backlit buttons1
are available on plastic caps. To insert a label on a
buttonwe recommend doing this before installing the controller, as it involves
removing the face plateunscrew the faceplate attachment screws, using a
screwdriver, gently remove the transparent button cap with your fingers, and insert
the label under the button cap. Replace the button cap with the label onto the
button base.
1 You can program the color of the button with flexible RGB values