Kramer Electronics SV-551 9 SummitView System Cables

SummitView™ System Cables

33 Table 9: Terminal block Connector Pinout (England and Europe)

SV-301, SV-304, SV-305 Rear Panel PINOUT

SV-302, SV-303 Rear Panel PINOUT

Brown

Gnd

Brown / White

Green

Blue / White

Blue

Green / White

Orange

Orange / White

DDC

PC

Brown

Gnd

Brown / White

Green

Blue / White

Blue

Green / White

Orange

Orange / White

Video

Notes:

• The “PC” section has 9 pins; the “DDC” section has 8 pins. Only use the

connector clips to remove the wires, not when inserting them

• Each wire protrudes 9mm in length from the plastic casing so that it can

be easily connected. To prevent the wires crossing, be sure that each wire

is completely inserted

• With STP cable, the GND pin is used for shielding. For the DDC

channel, shielding is not needed, but if desired, connect the GND pin of

the PC

9 SummitView™ System Cables

Table 10 defines the recommended cables for a SummitView™ installation.

Table 10: Cables included with the SV-551 SummitView™ Essentials Kit and SV-551 ALC

Cable Name Description Function SV-551

ALC

Essentials Kit

Power Cord AC mains cable Connect the SV-551 to the AC

mains supply

1 1

C-MGM/MGM-3 Molded Micro VGA to

VGA cable 3ft (0.91m)

Connect the SV-551 to a display

device

1 1

C-RVM/RVM-3 Molded RCA RG-59

video cable 3ft (0.91m)

Connect the SV-551 to a display

device

1 1

C-SM/SM-3 s-Video cable 3ft

(0.91m)

Connect the SV-551 to a display

device

1 -

C-R3VM/R3VM-3 Component MINI high

resolution cable 3ft

(0.91m)

Connect the SV-551 to a display

device

1 -