Kramer Electronics TP-141 user manual Link LED

	#		Feature		Function
1		LINK LED		Illuminates when receiving the correct input signal
2		LEVEL Trimmer		Adjusts the output signal level
3		EQ. Trimmer		Adjusts the cable compensation equalization level
				Degradation and VGA/XGA signal loss can result from
				using long cables (due to stray capacitance),
				sometimes leading to a total loss of sharpness in
				high-resolution signals.
				Use a screwdriver to carefully rotate the trimmer,
				adjusting the appropriate level.
4		ON LED		Illuminates when receiving power
5		XGA OUT 15-pin HD Connector		Connects to the XGA acceptor
6		LINE IN RJ-45 Connector		Connects to the TP-141
7		AUDIO OUT ANALOG 3.5mm Mini		Connects to the analog audio acceptor
		Jack
8		AUDIO OUT S/PDIF RCA		Connects to the digital audio acceptor
		Connector
9		12V DC		+12V DC connector for powering the unit
10		VS Switch		To set V SYNC to positive polarity, slide the switch
				to the right; to set the V SYNC to negative polarity,
				slide the switch to the left
				By default, both switches are set to the left (for a
				negative V SYNC and H SYNC polarity)
11		HS Switch		To set H SYNC to positive polarity, slide the switch
				to the right; to set the H SYNC to negative polarity,
				slide the switch to the left
12		XGA/VIDEO Switch		To set for any video signal, such as HDTV, slide the
				switch to VIDEO; to set for a computer graphics
				signal, slide the switch to XGA

8 TP-141, TP-142 - Overview