Kramer Electronics TP-141 user manual Overview, About the Power Connect Feature

3 Overview

The TP-141and TP-142are a high-immunity, extended-range twisted pair transmitter and receiver for computer graphics video and unbalanced stereo audio signals.

The TP-141converts computer graphics video and audio inputs to twisted pair signals, and the TP-142converts the twisted pair signals back into computer graphics video, unbalanced stereo and S/PDIF digital audio signals. Together the TP-141and TP-142form a computer graphics video/audio line transmitter/receiver system.

More specifically, the products feature:

∙Highest immunity from any kind of interference

∙Resolution up to UXGA

∙HDTV compatibility

∙Simultaneous unbalanced stereo and S/PDIF (24-bit 48kHz) audio outputs (TP-142)

∙Level (gain) and EQ (peaking) controls (TP-142)

∙System range up to 250m (750ft)

∙Power Connect™ System - Only one unit in a system, the transmitter or the receiver, needs to be connected to a power source when the devices are within 50m (150ft) of each other

Note: The TP-141and TP-142are not compatible with existing Kramer TP units such as the TP-121, TP-122, and so on.

3.1About the Power Connect™ Feature

The Power Connect feature applies as long as the cable can carry power. This feature is available when using STP cable and the distance does not exceed 50m (164ft) on standard CAT 5 cable. For longer distances, heavier gauge cable should be used (TP cable is still suitable for the video/audio transmission, but not for feeding the power at these distances). For units which are connected via RJ-45

4 TP-141, TP-142 - Overview