RJ-45 connector on the TP-305A, via STP cabling (with a range of up to 300ft (up to100m)), see section 3.2
2.On the TP-123, connect:
A UXGA source (for example, the graphics card of a laptop) to the XGA IN 15-pin HD computer graphics video connector and an audio source to the Audio IN 3.5mm mini jack, for example, using a Kramer C-GMA/GMA cable (VGA HD15M +Audio jack to VGA HD15M +Audio jack)1
An RS-232 cable with a 9-pin D-sub connector at one end to the laptop, and a 2-PIN terminal block connector at the other end to the TP-123RS-232 port
3.Connect the LINE OUTPUT CAT 5 connectors as follows2:
The LINE OUTPUT 1 RJ-45 connector on the TP-305Ato the LINE IN RJ-45 connector on a TP-1243unit via STP cabling4 (with a range of up to 300ft (up to 100m))5
The LINE OUTPUT 5 RJ-45 connector on the TP-305Ato the LINE IN RJ-45 connector on another TP-1243unit, via STP cabling4 (with a range of up to 300ft (up to 100m))
4.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.
5.If necessary, set the HS and VS switches6 on the underside.
1 Not supplied. The full list of Kramer cables is on our Web site at http://www.kramerelectronics.com. Alternatively, you can connect an XGA source to the XGA IN 15-pin HD connector, and a separate audio source to the AUDIO IN 3.5mm mini jack 2 You do not have to connect all the outputs
3 Refer to the separate user manual, which can be downloaded at http://www.kramerelectronics.com 4 For details of how to wire a CAT 5 LINE IN/LINE OUT RJ-45 connector, see section 5.3
5 The TP-46 is connected to an additional TP-46 unit for transmitting the signal further 6 By default, both switches are set down (for normal V SYNC and H SYNC polarity)
7
