Kramer Electronics Technical Specifications2 of the TP-9/TP-10, VIDEO Specifications

Technical Specifications

6 Technical Specifications

Table 5 defines the technical specifications1:

Table 5: Technical Specifications2 of the TP-9/TP-10

	TP-9		TP-10
INPUTS:	1 composite video 1Vpp/75Ω on a		1 RJ-45 CAT-5 shielded connector (LINE IN)
	BNC connector
	1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω
	[C] on a 4-pin connector
	1 S/PDIF (digital audio) on an RCA
	connector
	1 audio (analog audio) <0dBu on a
	3.5mm mini connector
OUTPUTS:	1 RJ-45 CAT-5 shielded connector		1 composite video 1Vpp/75Ω on a BNC
	(LINE OUT)		connector
	2 IR emitters on 3.5mm mini		1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a
	connectors		4-pin connector
			1 S/PDIF (digital audio) on an RCA connector
			1 audio (analog audio) <8dBu on a 3.5mm
			mini connector
VIDEO Specifications
MAX. OUTPUT LEVEL:		2.6V
BANDWIDTH:		≥70MHz/-3dB
NON-LINEARITY:		<0.05%
DIFF. GAIN:		<0.05%
DIFF. PHASE:		0.09Deg
S/N RATIO:		>75dB RMS/5MHz weighted
AUDIO Specifications
MAX. OUTPUT LEVEL:		0dBu
BANDWIDTH:		20Hz to 20kHz/0.1dB
CONVERSION SAMPLE RATE:		48kHz
CONVERSION RESOLUTION:		24 bits
S/N RATIO:		>73dB
POWER SOURCE:		12V DC, 95mA	12V DC, 82mA
DIMENSIONS:		12cm x 6.95cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H
WEIGHT:		0.3 kg (0.67 lbs.) approx
ACCESSORIES:		Power Supply, 3.5mm to IR Emitter Control Cable (C-A35/IRE-10)
OPTIONS:		15m (50ft) cable and 20m (65ft) IR Emitter Extension Cables

1 Specifications for 100m of CAT 5 UTP cable, unless otherwise specified 2 Specifications are subject to change without notice

11