Kramer Electronics TP-9 Your TP-10 Audio/Video Line Receiver, Features and Functions of the TP-10

Your Audio/Video Line Transmitter and Line Receiver

4.2Your TP-10 Audio/Video Line Receiver

Figure 3 and Table 3 define the TP-10unit:

6 5 4 3 2 1 1 2 3 4 5 6

7 8 13 7 8 9 10 11 12 13

Figure 3: TP-10 Audio/Video Line Receiver

Table 3: Features and Functions of the TP-10

#		Feature	Function
1	CV OUT BNC Connector		Connects to the composite video acceptor
2	Y/C OUT 4-pin Connector		Connects to the s-Video acceptor
3	LINE IN RJ-45 Connector		Connects to the LINE OUT connector on the TP-91
4	AUDIO OUT	S/PDIF RCA	Connects to the digital audio acceptor
		Connector
5		ANALOG 3.5mm Mini	Connects to the analog audio acceptor
		connector
6	12V DC		+12V DC connector for powering the unit
7	LINK	AV LED	Illuminates when receiving the correct input signal
8		IR LED	Illuminates when receiving signals from an IR remote
			control transmitter
9	IR SENSOR		IR sensor red glass window
10	CV/Y	EQ. Trimmer2	Adjusts3 the video EQ. (equalization) compensation
11		LEVEL Trimmer2	Adjusts3 composite video output signal or Y output signal
12	C LEVEL Trimmer2		Adjusts3 the C output signal
13	ON LED		Lights when receiving power

1 Using a straight pin to pin UTP cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 4 and Figure 6)

2 If necessary (for example, when using a long cable), the adjustment range may be improved by opening the TP-10 cover and shorting the following jumpers: J9, for equalization, J7, for CV or Y levels, and J8, for C level

3 Insert a screwdriver into the small hole and carefully rotate it, trimming the level

7