Connecting the VP-200D XGA Differential Amplifier / DA
Figure 3: VP-200D (Lower Side Panel)
Table 1: VP-200D XGA Differential Amplifier / DA Features
# | Feature | Function |
1 | 12V DC | +12V DC connector for powering the unit |
2 | OUTPUT 2 HD15F Connector | Connect to the computer graphics acceptor 2 |
3 | OUTPUT 1 HD15F Connector | Connect to the computer graphics acceptor 1 |
4 | ON LED | Illuminates when receiving power |
5 | INPUT HD15F Connector | Connect to the computer graphics source |
6 | ID BIT Button | Pushing in activates the ID BIT1, releasing deactivates the ID BIT |
7 | EQ. Control Potentiometer | Adjusts the video EQ. (equalization) compensation |
8 | LEVEL Control Potentiometer | Adjusts the video signal level |
5 Connecting the VP-200D XGA Differential Amplifier / DA
To connect your
1.Connect a computer graphics source (for example, a computer) to the INPUT HD15F connector.
2.Push in the ID Bit button.
3.Connect the OUTPUT HD15F connectors to up to 2 acceptors, as follows:
Connect the OUTPUT 1 to the acceptor 1 (for example, a projector)
Connect the OUTPUT 2 to the acceptor 2 (for example, a display)
4.Connect the 12V DC power adapter (wall transformer) to the 12V DC socket and connect the transformer to the mains electricity.
5.If required, adjust the video EQ. and/or the video signal level.
It is recommended that you place the
1 Enabling the notebook or laptop to output a VGA signal to an external VGA monitor
2 Switch OFF the power on each device before connecting it to your
3
