Manually connect the product to a wireless network

During the first 120 minutes of product setup, or after resetting the product's network defaults (and without a network cable attached to the product), the product's wireless radio will broadcast a wireless setup network for the product.

The name of this network is “HP-Setup-xx-[product name]”.

NOTE: The “xx” in the network is name is the last two characters of the product's MAC address.

The product name will be either HP Officejet Pro X451 Series or HP Officejet Pro X551 Series.

1.From a wireless enabled product, connect to the setup network for the device.

2.Open a web browser while connected to this setup network, and open the HP Embedded Web Server (HP EWS) using the following IP address:

192.168.223.1

3.Find the Wireless Setup Wizard in the product's EWS and follow the on screen instructions to manually connect the product.

NOTE: The product uses Automatic DHCP by default.

38

Chapter 3 Connect the product

ENWW

Page 52
Image 52
HP Pro X X451DN Inkjet CN459A#B1H manual Manually connect the product to a wireless network