HP Pro X X451DN Inkjet CN459A#B1H HP ePrint, Link speed and duplex settings, Setting Description

Link speed and duplex settings

NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks.

The link speed and communication mode of the print server must match the network hub. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel.

NOTE: The setting must match with the network product to which you are connecting (a network hub, switch, gateway, router, or computer).

NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle.

1.From the control panel, press (X451 Series) or touch (X551 Series) the Setup button.

2.Press or touch the Network Setup menu item.

3.Press or touch the Advanced Setup menu item.

4.Press or touch the Link Speed menu.

5.Select one of the following options.

Setting			Description
Automatic			The print server automatically configures itself for the highest link speed and
			communication mode allowed on the network.
10	Half		10 megabytes per second (Mbps), half-duplex operation
10	Full		10 Mbps, full-duplex operation
100		Full	100	Mbps, full-duplex operation
100		Half	100	Mbps, half-duplex operation

6.Press or touch the OK button. The product turns off and then on.

HP ePrint

With HP ePrint , you can print anywhere, anytime, from a mobile phone, laptop, or any other mobile device. HP ePrint works with any email-capable device. If you can e-mail, you can print to an

HP ePrint-enabled product. For more details, go to www.hpeprintcenter.com.

NOTE: The product must be connected to a network and have Internet access to use HP ePrint.

ENWW Connect the product to a network 35