xxxx::xxxx:xxxx:xxxx:xxxx
2.To open the HP Embedded Web Server, type the IP address (IPv4) into the address line of a Web browser. For IPv6, use the protocol established by the Web browser for entering IPv6 addresses.
3.Click the Networking tab to obtain network information. You can change settings as needed.
Set or change the product password
Use the HP Embedded Web Server to set a password or change an existing password for a product on a network so unauthorized users cannot change the product settings.
1.Type the product IP address into the address line of a Web browser. Click the Settings tab, click Security, and then click the Password Settings link.
NOTE: If a password has previously been set, you are prompted to type the password. Type “admin” for User Name along with the password, and then click the Apply button.
2.Type the new password in the Password box and in the Confirm Password box.
3.At the bottom of the window, click the Apply button to save the password.
Manually configure IPv4 TCP/IP parameters from the control panel
Use the
HP OfficeJet Pro X451
1.Select the Setup option from the Home screen.
2.Select the Network option.
3.Select the Advanced Setup option.
4.Select the IPv4 option.
5.Select the Manual option.
6.Select the IP Address option.
7.Use the numeric keypad to enter the IP address, and touch the OK button. Touch the Yes button to confirm.
8.Use the numeric keypad to enter the subnet mask, and touch the OK button. Touch the Yes button to confirm.
9.Use the numeric keypad to enter the default gateway, and touch the OK button. Touch the Yes button to confirm.
HP OfficeJet Pro X551
1.From the control panel, touch the Wireless button.
2.Touch the Advanced Setup menu, and then touch the IPv4 Settings button.
ENWW | Connect the product to a network | 33 |