Menu item | Description | |||
|
|
|
|
|
|
| Default Paper | Plain Paper | Sets the type of paper for printing internal reports, or |
|
| Type | Premium Inkjet | any print job that does not specify a type. |
|
|
|
| |
|
|
| ... |
|
|
|
| For a complete |
|
|
|
| list of paper sizes, |
|
|
|
| see Supported |
|
|
|
| paper types and |
|
|
|
| tray capacity. |
|
Tray Lock | Tray 1 |
| Tray 2 |
| Tray 3 |
| None* |
Tray Lock is a feature that “locks" a tray so that the only time the printer will draw from that tray is when it is specifically requested. This is useful when putting special paper in a tray, such as letterhead. If using “Automatically Select" for the paper source and Tray 1 is locked, the printer will only draw from the remaining trays, either Tray 2 or optional Tray 3, if it is installed. Printing can still be done from the locked tray, but the source must be specified. Tray 1 lock may be overridden under certain conditions.
Duplex | On | Bind on Long | Selects whether to turn duplexing on or off. If on, | ||
|
| Edge | select to have the page indented on the long edge or | ||
|
| Bind on Short | short edge of the paper for binding. | ||
|
|
| |||
|
| Edge |
| ||
|
|
|
|
|
|
| Off |
|
|
|
|
|
|
|
|
|
|
Ink Low Warning | Automatic |
|
|
| Determines when the Low Ink warning message |
Level | Custom |
|
|
| appears on the control panel. Choose Custom to |
|
|
|
| select a cartridge color and ink level value from | |
|
|
|
|
| |
Power Handling | Standby | 5 | Minutes | Determines when to put the product in Standby mode. | |
|
| 10 | Minutes * |
| |
|
| 15 | Minutes |
| |
|
| 30 | Minutes |
| |
|
| 1 | Hour |
| |
|
|
|
|
| |
| Sleep After | 15 | Minutes | Determines when to put the product to sleep after it | |
| Standby | 30 | Minutes | has been put into Standby mode. | |
|
|
| |||
|
| 1 | Hour |
| |
|
| 2 | Hours * |
| |
|
|
|
|
|
|
ENWW | Setup Menu | 25 |
