HP ePrint is disabled as a default setting in the product. Use this procedure to enable it.
1.Type the product IP address into the address line of a Web browser to open the HP Embedded Web Server.
2.Click the HP Web Services tab.
3.Select the option to enable Web Services.
Connect the product to a wireless network (wireless models only)
Before installing the product software, make sure the product is not connected to the network using a ehternet cable.
If your wireless router does not support
●Obtain the wireless network name or service set identifier (SSID).
●Determine the security password or encryption key for the wireless network.
Connect the product to a wireless network using the Wireless Setup Wizard (Officejet Pro X551)
If your wireless router does not support
1.From the Home screen on the product control panel, touch the Setup 
button.
2.Touch the Network button, and then touch the Wireless Setup Wizard button.
3.The product scans for available wireless networks and returns a list of network names (SSIDs). Select the SSID for your wireless router from the list if it is available. If the SSID for your wireless router is not in the list, touch the Enter SSID button. When prompted for the type of network security, select the option that your wireless router uses. A keypad opens on the control panel display.
4.If your wireless router uses WPA security, type the passphrase on the keypad. If your wireless router uses WEP security, type the key on the keypad.
5.Touch the OK button, and wait while the product establishes a connection with the wireless router. Establishing the wireless connection can take a few minutes.
Connect the product to a wireless network using WPS
1.From the product control panel, press (X451 Series) or touch (X551 Series) the Wireless 
button.
2.Press the Wireless menu button.
36 | Chapter 3 Connect the product | ENWW |
