Kramer Electronics user manual Connecting the WP-211DS, Example of a WP-211DS Installation

Using the WP-211DS

5.3Connecting the WP-211DS

To connect your WP-211DS, do the following:

1.Connect a computer graphics (master) source to the XGA INPUT 1 HD15F connector and to the AUDIO IN 1 3.5mm mini jack, for example, using a Kramer C-GMA/GMA cable1.

2.Set the DEFAULT SELECT switch to IN 1 (the factory preset default) or IN 2, as section 5￿ .4 describes.

3.Connect a second computer graphics source to the XGA INPUT 2 HD15F connector and to the AUDIO IN 2 3.5mm mini jack, for example, using a Kramer C-GMA/GMA cable1.

4.Connect an additional display to the LOOP HD15F connector (optional).

Figure 5: Example of a WP-211DS Installation

1 XGA HD15M +Audio jack to XGA HD15M +Audio jack (not supplied). The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com. Alternatively, you can connect an XGA source to the XGA INPUT HD15F connector, and a separate audio source to the AUDIO IN

7