Kramer Electronics user manual Connecting the WP-220E

Using the WP-220E XGA/Audio/Video Line Driver

Alternatively, you can connect an XGA source to the Input HD15F connector, and a separate audio source to the AUDIO Input.

2.Connect a composite video source (for example, a VCR) to the CV IN RCA connector and connect the corresponding audio to the LINE AUDIO LEFT and RIGHT RCA connectors.

3.If required, adjust1 the XGA cable compensation equalization level and/or the CV cable compensation equalization level/output signal level, as well as the right1 and/or left1 line audio output signal levels.

Figure 9: Connecting the WP-220E

1 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level

8 KRAMER: SIMPLE CREATIVE TECHNOLOGY