Back Panel Description
See Figure 2 on page 7
| The Showcase Amplifier back panel provides connections for all |
| inputs and outputs, remote connection input and output links, and |
| the AC power supply. |
BALANCED INPUTS | 4 Inputs |
| The Showcase Amplifier has seven channel inputs for output |
| devices with balanced XLR connectors. |
5 Inputs | |
INPUTS | The Showcase Amplifier has seven channel inputs for output |
| devices with |
| Use only one input to each amplifier channel at a time. You may use |
IMPORTANT | |
| the balanced inputs for some of the amplifier channels and the |
| |
AMPLIFIER CHANNEL | 6 Outputs |
OUTPUTS | The Showcase Amplifier has seven amplifier channel outputs. The |
| loudspeaker binding post terminals accept spade lugs, bare wire, or |
| pins. Use the red terminal for the positive connection and the black |
| terminal for the negative connection. |
|
|
IMPORTANT | Tighten loudspeaker binding posts by hand only. |
BACK PANEL REMOTE | 7 12 VDC Remote Power Out |
CONNECTIONS | The Showcase Amplifier is equipped with an output that sends 12 |
| VDC power on/off (12 V trigger) signals to other Krell components |
| and other devices that incorporate a 12 V trigger. |
| When the component is in the operational mode, the 12 VDC Out pro- |
Notes | |
| vides 12 V of DC output. When the component is in the |
| off, the DC output is 0 V. |
| 12 VDC Out (12 V trigger) current is limited to 30 mA. |
8 | Krell Showcase Amplifier |
