Krell Industries 5, 7, 6 manual Front Panel Description, Power Button, Stand-by LED, Power LED

Front Panel Description

See Figure 1 on page 5

The Showcase Amplifier front panel provides power on and indi- cates operating status.

1 Power Button

Use this button to switch the Showcase Amplifier power between the stand-by and the operational modes and also to switch the 12 VDC output (12 V trigger) on and off.

2 Stand-by LED

The red stand-by LED illuminates when the AC power cord is plugged into the wall. The stand-by LED flashes when the protec- tion circuit is activated.

3 Power LED

The blue power LED illuminates when the amplifier is in the opera- tional mode.

6 Krell Showcase Amplifier