Krell Industries 5, 7, 6 manual VDC Remote Power, IEC Connector and Fuseholder

Back Panel Description, continued

BACK PANEL REMOTE CONNECTIONS,

continued

Note

8 12 VDC Remote Power In

The Showcase Amplifier is equipped with an input that receives 12 VDC power on/off (12 V trigger) signals from other Krell compo- nents and other devices that incorporate a 12 V trigger. This allows you to turn the Showcase Amplifier on and off using a Krell or other component in a custom installation.

Consult the owner’s manual of each component used in a custom installa- tion to take full advantage of the Showcase Amplifier remote capability.

POWER

Note

9 IEC Connector and Fuseholder

The connector is for use with the provided IEC standard 15 amp power cord. The AC mains fuse protects the Showcase Amplifier in the event of an internal fault.

The AC mains fuse must be replaced with the spare fuse provided. Use the 10 A slow-blow fuse for 100 –120 VAC or the 5 A slow-blow fuse for 220 –240 VAC.

Krell Showcase Amplifier 9