Cisco Systems 2140, 2130 manual Input/Output Ports and Connectors, Ethernet Port NIC 1 and NIC

Chapter 1 Introducing the Cisco Application Deployment Engine 2130 and 2140 Series Appliance

Hardware Features

Table 1-8	DC Power Supply LED
LED	Color	State	Description
Below DC		Off	No DC input power to power supply
power
	Green	Blinking	DC power applied to power supply and standby voltages are
supply input
			available
connector
	Green	Solid	All power available
	Amber	Blinking	DC power supply warning due to overcurrent or
			overtemperature condition or slow fan
	Amber	Solid	DC power supply failed or shut down due to blown fuse, high
			overcurrent or overtemperature condition, or fan failure

Input/Output Ports and Connectors

The Cisco ADE 2130 and 2140 Series appliance supports the following I/O connectors on the rear of the appliance:

•Ethernet connectors

•Serial connector

•Video connector

•Mouse connector

•Keyboard connector

Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Ethernet Port (NIC 1 and NIC 2)

The Cisco ADE 2130 and 2140 Series appliance comes with two integrated dual-port Ethernet controllers (1 and 2). These controllers provide an interface for connecting to 10-Mb/s, 100-Mb/s, or 1000-Mb/s networks and provide full-duplex (FDX) capability, which enables simultaneous transmission and reception of data on the Ethernet local-area network (LAN).

The appliance comes with an Ethernet RJ-45-to-RJ-45 yellow cable.

Note (Optional) NIC ports 3 and 4 can be installed using a mezzanine module on the appliance. Additionally,

the NIC LEDs for these ports are located on the bottom and not the top as for the NIC 1 and 2.

To access the Ethernet port, connect a Category 3, 4, 5, 5E, or 6 unshielded twisted-pair (UTP) cable to the RJ-45 connector on the back of the appliance. (See Table 1-9.)

Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide

78-18579-02 1-11