Chapter 1 Introducing the Cisco Application Deployment Engine 2130 and 2140 Series Appliance
Product Overview
Product Overview
The Cisco ADE 2130 and 2140 Series appliance (see Figure 1-1) is contained in a standard shelf-rack enclosure. The appliance weighs from 30 lb (13.6 kg) to 51.5 lb (23.4 kg) depending on what options are installed in the appliance. It measures 3.5 inches high x 16.93 inches wide x 20 inches deep (8.9 cm x 43.2 cm x 50.8 cm). These dimensions do not include the rack handles.
Figure 1-1 Cisco ADE 2130 and 2140 Series Appliance
| b n l o ` b s | | |
| | ?r | |
q | v | t | |
| | o hc?uhc | r mY?b`a OPQROOOP |
| | |
This guide describes the Cisco ADE 2130 and 2140 Series appliance models listed in Table 1-1.
Table 1-1 Cisco ADE 2130 and 2140 Series Appliance Models
Model | Cisco Product Number |
Cisco Application Deployment Engine Series 2130 | CADE-2130-K9 |
Cisco Application Deployment Engine Series 2140 | CADE-2140-K9 |
| |
Note See Chapter 4, “Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options,” for upgrade options and spare part numbers.
The Cisco ADE 2130 and 2140 Series appliance is configured for AC-input or DC-input power, mounted in a standard 19-inch (48.3 cm) 2- or 4-post equipment rack (using the rack-mount brackets provided), and includes the following features:
•Microprocessor:
–Cisco ADE 2130 Series appliance—Intel Xeon 1.86-GHz processor with a 1066-MHz front side bus (FSB) and 8 MB of Layer 2 cache (for the Cisco ADE 2130 Series appliance specifications, see Table 1-2 on page 1-5)
–Cisco ADE 2140 Series appliance—Dual Intel Xeon 1.86-GHz processor with a 1066-MHz front side bus (FSB) and 8 MB of Layer 2 cache (for the Cisco ADE 2140 Series appliance specifications, see Table 1-3 on page 1-5)
•Eight synchronous dynamic RAM (SDRAM) slots support up to 8 GB (2 GB factory installed)
•Support for up to 6 x 147-GB SAS hard drives (1 x 147-GB SAS hard drive factory installed)
•Integrated RAID at levels 0, 1, 5, 1+0, and 5+0
•Two fixed RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors (located on the rear panel)
•Two optional RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors using a mezzanine module (located on the rear panel)
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
