Cisco Systems manual Cisco ADE 2130 and 2140 Series Appliance Rear View, Switch

Chapter 1 Introducing the Cisco Application Deployment Engine 2130 and 2140 Series Appliance

Hardware Features

Table 1-4	Front Control Panel LEDs
LED		Color	State	Description
NICs (location 4)		Green	On	NIC activity
System ID (location 5)		Blue		System identity
				Note LED can be toggled remotely or by
				the front-panel ID switch to obtain
				the system’s identity.
Table 1-5	Front Control Panel Switches
Switch		Description
ID (location 6)		Toggles appliance ID LED
NMI (location 7)		Asserts the NMI1 (non-maskable interrupt) to the processor on the
		appliance
Reset (location 8)		Resets the appliance
Power (location 9)		Toggles the appliance power

1. When pressed, clears the processor allowing the processor to continue to execute the software normally.

Cisco ADE 2130 and 2140 Series Appliance Rear View

On the rear panel, viewing from left to right, the Cisco ADE 2130 and 2140 Series appliance includes the following components:

•Two PS/2 connectors (mouse and keyboard)

•One RJ-45 serial (console) connector

•Two RJ-45 NIC (1 and 2) ports

•One video (VGA) port

•Two USB 2.0 ports

•Five PCI adapter card slots (expansion slots)

•(Optional) Two RJ-45 NIC (3 and 4) ports

Note If the optional NIC ports (3 and 4) using a mezzanine module are not installed, a filler panel occupies this space.

•AC power connector or DC power connector

Figure 1-5shows the orientation of the following components.

Note The locations of the rack-mounting brackets are also shown on the left and right sides of the appliance. (See the “Rack-Mounting Configuration Guidelines” section on page 3-2for instructions on how to install the mounting brackets.)

Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide

1-8 78-18579-02