Cisco Systems 2140, 2130 manual Installing DIMMs

Chapter 4 Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options

Installing and Removing Memory

Installing DIMMs

To install the DIMMs:

Step 1 Review the information in the “Safety Warnings” section on page x and the “Safety Guidelines” section on page 2-2.

Step 2 Power down the appliance and all external devices. Disconnect the AC power cord or DC power source and all external cables.

Step 3 Attach the antistatic wrist strap to your wrist and connect its cord to the ESD socket on the top, left-hand side on the front of the appliance.

Step 4 Remove the appliance cover. For instructions, see the “Removing the Cover” section on page 4-3. Step 5 Locate the DIMM slots. (See Figure 4-6.)

Figure 4-6 Installing DIMMs

DIMM B2

DIMM B1

DIMM A2

DIMM A1

DIMM C1 DIMM C2

DIMM D1 DIMM D2

5	C
E	3

D4

1

A

B2

Branch 0

Branch 1

			231203
1	Ejector tab (open)	4	Ejector tab (closed)
2	DIMM notch	5	DIMM outside connector edge
3	DIMM top connector edge
	Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02			4-11