Cisco Systems 2130, 2140 manual Removing the PCI Riser Assembly, PCI riser assembly Pins

Chapter 4 Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options

Removing and Installing the PCI Adapter Card

•Installing a PCI Adapter Card, page 4-16

•Installing the PCI Riser Assembly, page 4-17

Caution Before removing or replacing the PCI riser assembly, you must first take the Cisco ADE 2130 and 2140 Series appliance out of service, turn off the appliance by pressing the power button, disconnect any external cables, and unplug the AC power cord or DC power source from the appliance.

Removing the PCI Riser Assembly

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

To remove the PCI riser assembly:

Step 1 Review the information in the “Safety Warnings” section on page x and the “Safety Guidelines” section on page 2-2.

Step 2 Power down the appliance and all external devices. Disconnect the AC power cord or DC power source and all external cables.

Step 3 Attach the antistatic wrist strap to your wrist and connect its cord to the ESD socket on the top, left-hand side on the front of the appliance.

Step 4 Remove the appliance cover. For instructions, see the “Removing the Cover” section on page 4-3. Step 5 Disconnect any cables attached to any adapter cards.

Step 6 Lift the riser assembly up to remove it. (See location 1 in Figure 4-7.)

Figure 4-7 Removing the PCI Riser Assembly from the Appliance

A1

2B

231196

1

PCI riser assembly

2

Pins

Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide

4-14 78-18579-02