Cisco Systems 2140, 2130 manual post Rails and Brackets

Chapter 3 Installing the Cisco ADE 2130 and 2140 Series Appliance

Mounting the Cisco ADE 2130 and 2140 Series Appliance in a 4-Post Rack

Mounting the Cisco ADE 2130 and 2140 Series Appliance in a 4-Post Rack

Warning When the appliance is installed in a rack and is fully extended on its slide rail, it is possible for the rack to become unstable and tip over, which could cause serious injury. To eliminate the risk of rack instability from extending the rail or in the event of an earthquake, you should affix the rack to the floor.

This section contains the following topics:

•4-PostRack-Mount Hardware Kit, page 3-7

•Attaching the Inner Slide Rails to the Appliance, page 3-8

•Attaching the Outer Slide Rails to the Rack, page 3-9

•Installing the Appliance into the Rack, page 3-9

4-Post Rack-Mount Hardware Kit

Figure 3-4shows the rails and brackets that you need to install the Cisco ADE 2130 and 2140 Series appliance in a 4-post rack. Figure 3-5and Table 3-2 on page 3-8describes the contents of the rack-mount hardware kit, Cisco part number CADE-2U-RAILS.

Figure 3-4 4-post Rails and Brackets

2

1

231554

3

1

2

Rear-mounting bracket of outer slide rail 3 Inner slide rail

Front-mounting bracket of outer slide rail

Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide

78-18579-02 3-7