(4)Remove the flat cable connector and detach the power supply and PCA assembly.
Flat cable
Flat cable connector
(5)Connect the IPC-2 option board connector and tighten the screw.
(6)Where a CMP-2 is installed, remove the screw from the memory board and detach the memory board. Connect the CMP-2 option board connector and tighten the screw.
IPC-2 option board
Screw for IPC-2
CMP-2 option board or memory PCA (M3096GX)
(not shown)
Screw for memory or CMP-2 (M3096GX)
(7)Attach the power supply and PCA assembly in the reverse order of removal.
