42 CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
1
2
1 screws (4) 2 compartment door
Use your ngertips to carefully spread apart the memory-module
5.
connector’s spring locks until the memory module pops up.
Remove the memory module.
6.
5
4
2
3
1
1 memory module 4 notch
2 spring locks (2) 5memor y-module connector
3 tab
To replace the memory modules, perform the removal steps in reverse order.
While inserting the memory module into the connector align the notch on the
memory module with the tab on the memory module connector.
NOTE: If you need to install memory modules in two connectors, install
a memory module in the lower connector before you install a memory
module in the upper connector.
NOTE: If the memory module is not installed properly, the computer may
not boot.