Krell Industries KAV400xi Back Panel Description, Left and Right Loudspeaker Outputs, 20 RC-5In

Back Panel Description

See Figure 3 on page 11

The KAV–400xi back panel provides connections for all inputs and outputs, power on/off, and additional remote connections.

AMPLIFIER CHANNEL OUTPUTS

14 Left and Right Loudspeaker Outputs

The KAV–400xi is equipped with standard binding posts for each amplifier channel. These connectors accept bare wire, pins, or spade lugs. Use the red terminal for the positive connection and the black terminal for the negative connection.

ANALOG INPUTS

ANALOG OUTPUTS

REMOTE CONNECTIONS

15 Left and Right Balanced Analog Inputs

The KAV–400xi is equipped with one pair of balanced (B-1) inputs via XLR connectors.

16 Left and Right Single-Ended Analog Inputs

The KAV–400xi is equipped with three pairs of single-ended (S-1, S-2, or S-3) inputs via RCA connectors.

17 Left and Right Tape Inputs

The KAV–400xi is equipped with a pair of single-ended tape inputs via RCA connectors.

18 Left and Right Tape Outputs

The KAV–400xi is equipped with a pair of single-ended tape outputs via RCA connectors.

19 Left and Right Preamp Outputs

The KAV–400xi is equipped with a pair of single-ended pre- amplifier outputs.

20 RC-5 In

The KAV–400xi is equipped with an RC-5 input that makes cus- tom installation easy and secure by accepting baseband RC-5 input commands from hardwired remote controllers.

21 12 VDC In/Out (12 V Trigger)

The 12 V Trigger allows you to turn the KAV–400xi on or off, or to and from stand-by, from other components.

Out. The output sends 12 VDC (12 V trigger) power on/off signals to other Krell components and other devices that incorporate a 12 V trigger.

12 Krell KAV–400xi