Krell Industries KAV400xi manual Tape Input and Output

Operating Your KAV– 400xi,

ON/OFF AND STAND-BY OPERATION, continued

Tape Input and Output

continued

3.Start playing the source.

4.Set the volume to a comfortable listening level using the level knob on the front panel or the level keys on the remote control (10).

5.To turn the amplifier off, press the power button on the front panel or the power key on the remote control (1). The red stand-by LED (3) illuminates.

It is now safe to turn off the rest of the system.

The KAV–400xi has a discrete tape input and output. The tape output is used to send an input signal from S-1, S-2, S-3, or B-1 to a recording device or processor. You can use the tape feature in three ways:

1.Use the tape button on the front panel or the tape key on the remote (6) to playback pre-recorded tapes.

2.Use the tape input to compare the output signal of a three- head analog tape recorder to the output signal of an audio source, when making a recording. To activate this function, select an audio source for recording using either the S-1, S-2, S-3, or B-1 analog input buttons or keys (5). Press the tape button on the front panel or tape key on the remote on the to switch between the tape recorder output (red tape monitor LED [7] illuminated) and the input source (red tape monitor LED not illuminated).

3.Use the tape output to create a processor loop, when the KAV–400xi is connected to a graphic equalizer or other ancil- lary equipment. To activate this function, connect the equip- ment to the KAV–400xi tape outputs (18) as described in the equipment manufacturer’s manual. Press the tape button on the front panel or tape key on the remote to switch between the processor output (red tape monitor LED [7] illuminated) and the input source (red tape monitor LED not illuminated).

Note	When changing sources, lower the volume to off or mute the output. This
	ensures that the next source played does not damage your system with
	a high output transient.

16 Krell KAV–400xi