Krell Industries KSA-300S, KSA-200S Connections, Installation section, for AC power requirements

CONNECTIONS

The pin assignment for the XLRis: pin 1 = shield (ground)

pin 2 = non-inverting input (hot) pin 3 = inverting input

NOTE:The RCAcenter conductor for each channel is wired in parallel with pin 2, the non-inverted input. Only one of these inputs should be connected

to a preamplifier. Do not attempt to use the single-ended and balanced inputs simultaneously.

3. Insert the AC power cord into the receptacle located on the back of the

KSA. Insert the other end into the wall AC receptacle. (Refer to the Basic

Installation section, for AC power requirements)

4.The amplifier is now ready for operation. Should you have any questions regarding system set-up, contact your dealer or KRELLIndustries.

PAGE 10