UNPACKING
NOTE:Due to the extreme weight of the KSAamplifiers, it is strongly advised that unpacking and placement is completed by at least two individuals.
1.Open the box.
2.Fold back the flaps on all four sides of the box and carefully roll it over on to the exposed end.
3.Pull the box straight up and off exposing the foam packing material.
4.Pull the foam piece from the exposed end of the amplifier.
5.Roll the amplifier carefully onto its handles and remove the second piece of foam.
The following items will now be visible:
i | KSAstereo | amplifier |
i | Remote control | |
i | Warranty | card |
i | AC power | cord |
4or5 | Rubber feet bottoms | |
NOTE:If any' of these items are not included, please contact your authorized dealer immediately for assistance.
6. Remove the plastic bag from the amplifier.
NOTE:Save all packing materials. If you must ship your KSAin the future, repack the unit in its original packaging to prevent transit damage. Should the unit require service, send the remote control and AC power cord with the amplifier.
CAUTION:Do not connect the power cord to the AC mains before completing the Installation section.
PAGE 4
