Krell Industries KST100 manual G.Monaural Conversion And Operation

G.MONAURAL CONVERSION AND OPERATION

The KST-100can be easily cgnverted into a 400 watt monauralamplifier. To switcla the amplifier to mono follow these instructions.

1.Removethe topcover fromthe amplifier via 8 topcover screws.

2.Find the toggle switch located at the rear of the ampli- fier mountedon the circuitboard.. Mo.vethe toggle switch over to the Monosetting printecl on tlae circuitboard.

3.Reinstall the topcoverand the 8 topcoverscrews.

OPERATION

1.The input of the KST-100in Monooperation is the Left channelinput only.

Connectthe Left output of your preamplifier to the Left channel input of the ~lesignated left channel monoampli-

tier. Connectthe rig~ht output of your preamplifierto the left channel input ot the designated right channel mono amplifier.

2.The output of the KST-100in Monooperation is the

positive outside binding posts of each channel. Theinside Black binding post of each channel in monois not opera- tional.

Connectthe left and right channel outer binding posts on each amplifier to the loudspeaker.

NOTE:Paycareful attention to the labeling on the. backpanel of the KST-100whenmakinginput anti output connections. Connectingthis amplifier i~or monaural operation can becomeconfusing.

10