Krell Industries KST100 manual Thepin assignment for the XLRis

Thepin assignment for the XLRis:

pin _1-=shield (ground)		.
p!n 2	= non-inverting~nput(hot)
p~n3	- inverting input

NOTE:The RCAcenter conductor for each channel is wiredjn, parallel with pin 2, the non-inv.ertedinput. Only oneot tlaese inputs shouldbe connecteclto a preamplifier.

3.Insert the ACpowercord into the receptacle located on the back of the KST-100Insert. the other end into the

wall ACr_.eceptacle. (Refer to section C, BasicInstalla- tion and Operation, for ACpowerrequirements)

7