B.UNPACKING AND ASSEMBLY
NOTE:Doto the weightof the
advised that unpackingand placementis completedby at least twoindividuals.
1.Openthe box on one end.
2.Fold backthe flaps on all four sides of the boxand carefully roll it over on to the exposedend.
3.Pull the boxstraight up and off exposingthe foam packingmaterial.
4.Lay the foamcontainer downon the floor and pull off the top section.
The following items will nowbe visible:
1 | |
1 | Warranty card |
1 | ACpower cord |
4 | Rubber bottoms |
NOTE:If any of these items are not included please contact your authorized dealer immediatelyfor assis- tance.
5.Pull the amplifier out of the remaininglayer of foam.
6.Removethe plastic bag fromthe amplifier.
NOTE:Save allpacking materials. If you must ship. your
CAUTION:Do not connect the power cord into the AC mainsbefore completingthe Installation section.
4
