Krell Industries SBP-32X manual C. Fcc Compliance Statement

C. FCC COMPLIANCE STATEMENT

WARNING:Changes or modifications to this unit not

expressly_ approvedby t_h,e party responsible for compli- ance could void the user s authority to operate the equip-

ment.

Note: This equipment has been tested and found to com- ply with the fimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to

provide reasonable .protection against harmful interfer-

ence in a residential-installation. This equipmentgener- ates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions maycause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of-the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.

Consult your dealer or an experienced radio~V technician for help.

The user mayfind the following booklet prepared by the Federal Communications Commission helpful: "Television Interference Handbook"

This booklet is available from the U.S. Government Printing Office, Washington DC20402.

Stock No. 004-000-00450-7

WARNING:The use of non-shielded analog output cables and non-shielded digital input' cables if coax is used for the digital input (fibre optic interconnect need not be shielded) will invalidate the FCCCertification of this device and maycause interference levels which exceed the limits established by the FCCfor this type of device.

2