CAUTION:Do not remove or bypass the ground pin on the end of the ACcord. This maycause RFI (radio fre- quency interference) to be induced into your playback
system.
4.Connect the Digital Output from a Krell CDTurntable or any digital source to the Digital Input on the back
paneI of your processor..Ygur SBP-32Xwill accommo- ~late digital input fromeitlaer the coaxial or fibre optic
outputs of any CD,DATor Satellite broadcast source.
Note: Care should be taken in selecting the type of cable used to link the digital source to your processor. If co- axial cable is to be used it should be non-capacitive and have a bandwidth in excess of 10MHzto prevent drop- out errors.
Note I.f a fibre optic cable is selected westrongly recom- i
mencl that it be a-high quality quartz fibre cable. An additional benefit ot~ filSre optic cable is a reduction of ground loop problems that often occur in audio systems.
5.Connect the appropriate OUTPUTof the SBP-32Xto the line level INPUTofyour preamplifier' The red banded connector indicates the right channel and the white indicates the left.
The SBP-32Xis equipped with two output configura- tions: Single-ended via RCAconnectors and Balanced via XLRconnectors. If your preamplifier has high level balanced inputs we recommendthe balanced outputs of the processor be used. There are considerable sonic benefits associated with balanced operation.
NOTE:both outputs can be used to simultaneously feed two different systems.
