English
■Place the ring seal (d3) onto the base of the removable blade carrier (d2) (diagram 1).
■Press the assembly (d2 + d3) down into the locking ring base (d1). It will click into place.
■Hold this assembly upside down (locking ring base + blade assembly + seal) and place it onto the glass jar, which has to be held upside down too (diagram 2). Take care to ensure that the glass knobs of the jar (there are two of them) fit into the grooves in the locking ring base (diagram 2).
■Hold the locking ring base (d1) firmly and give the glass jar a quarter turn to lock it in place (diagram 2). For your safety, the set- ting up and dismantling of the base (d2 + d3) on the bowl (d4) are possible only in the inverted position.
■Place the assembled blender jar (D) onto the metal base (A). There are two possible positions: the jar handle can be in the left or right of the control panel (B). For your own safety, the blender will not start un- less it is correctly assembled and positioned on the metal base.
■Place the ingredients to be blended in the jar. Take note of the following maximum levels:
-60 oz for thick mixtures
-50 oz for very liquid mixtures
-6 to 8 large (1/3L or 3 cups max) ice cubes for ice crush.
■Insert the lid stopper in the lid. Place the lid on the jar and twist coun-
■Plug in the appliance. To begin blending, choose a function or speed. To stop blending at any time, press OFF.
Blending speed options are Slow – 1 – 2 – 3 – 4. (Slow is the lowest speed, 4 is the highest speed).
Start on Slow (b2) and then gradually increase to the desired speed. The selected speed button will light up. To stop processing at any time, press OFF (the indicator light for the speed selected will go out).
NOTE: The Slow speed can also be used to mix in solid ingredients that you do not wish to process, such as adding chocolate chips or nuts after blending a batter.
7
