Krups KB790 manual Cleaning

English

■To add ingredients while blending, carefully remove the lid stopper from the center of the lid and add ingredients through the opening. Replace the lid stopper once ingredients have been added.

■If you wish to scrape down the slides of the jar, press OFF and unplug the appliance before removing the blender jar from the base. Never reach into the blender jar with the jar still on the base. Unlock the lid and use a plastic spatula to scrape down the sides. The blades at the bottom of the blender jar are very sharp, take care when scraping the jar to not damage your tools.

■Never put hands or fingers into the glass jar or close to the blade.

■Always start blending on the lowest speed then increase to the desired speed.

■Remove the blender jar from the metal base only when it has come to a standstill.

■Cord storage: The power cord can be shortened by feeding back into the metal base through the opening in the rear (diagram 4).

CLEANING

■Always turn the blender off and unplug, then remove the blender jar from the base before cleaning.

■Wipe the metal base with a damp cloth and dry before using.

■Never immerse the base in water or place under running water.

■Do not clean base with harsh or abrasive chemical cleaners or sponges.

■The blender jar and lid can be washed in the dishwasher. The blender lid should be washed on the top rack only to prevent deformation.

■When washing by hand, use warm water and a gentle dishwashing liquid.

■Always remove the blade assembly from the bottom of the blender jar before washing.

■To clean the blade assembly, empty the jar and hold upside down, with the locking ring base on top, then release the locking ring base, and carefully remove the blade assembly and seal from the locking ring base.

10