Zanussi ZDT 312 Cleaning the spray arms, External cleaning, Internal cleaning, Frost precautions

Models: ZDT 312

1 28
Download 28 pages 39.19 Kb
Page 18
Image 18

Put the flat filter A back in

Replace the filters and

the base of the washing

lock by turning the handle

compartment and ensure

clockwise to the stop.

that it fits perfectly under

 

the two guidesD.

 

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or sol- vent (acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the de- tergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run the wash programme for heavy soiled dishes using de- tergent but without dishes.

18

Prolonged periods of non- operation

If you are not using the machine for any pro- longed period of time you are advised to:

1.Unplug the appliance and then turn off the water.

2.Leave the door ajar to prevent the forma- tion of any unpleasant smells.

3.Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the ap- pliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc....):

1.Unplug it.

2.Turn the water tap off.

Page 18
Image 18
Zanussi ZDT 312 manual Cleaning the spray arms, External cleaning, Internal cleaning, Prolonged periods of non- operation