4.The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.
5.Once the delay start has elapsed the pro- gramme will start automatically.
Cancelling the delay start
To cancel a delay start in progress you have to reset the dishwasher.
Press simultaneously and keep pressed func- tion buttons B and C until all programme button light are illuminated.
Cancelling a delay start involves also the can- celling of the washing programme set. In this case you have to set the washing programme again.
CAUTION!
Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.
Interrupt a washing programme in pro- gress:
•Open the dishwasher door; the programme will stop. Close the door; the programme will
start from the point at which it was interrup- ted.
Cancel a washing programme in progress
•Open the dishwasher door; press simultaneously and keep pressed function
buttons B and C until all programme button is illuminated. The washing programme has been cancelled. .
•If a new washing programme is to be selec- ted, check that there is detergent in the detergent dispenser.
Cancelling the "delay start"
•To cancel a delay start in progress, open the door and press the delay start button, the corresponding light turns off.
•close the door, the set washing programme will start automatically.
End of the washing programme
•The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.
•Open the dishwasher door.
•The end of programme indicator light is il- luminated.
•The indicator light of the programme just ended will remain on.
•Switch off the dishwasher by pressing the On/Off button.
IMPORTANT!
When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off.
7
