![](/images/new-backgrounds/1087732/8773219x1.webp)
Water hardness
Clarke | °TH | mmol/l |
46 - 52 | 65 - 75 | 6,5 - 7,5 |
36 - 45 | 51 - 64 | 5,1 - 6,4 |
28 - 35 | 40 - 50 | 4,0 - 5,0 |
23 - 27 | 33 - 39 | 3,3 - 3,9 |
18 - 22 | 26 - 32 | 2,6 - 3,2 |
13 - 17 | 19 - 25 | 1,9 - 2,5 |
5 - 12 | 7 - 18 | 0,7 - 1,8 |
< 5 | < 7 | < 0,7 |
|
|
|
The water softener must be set in both ways: manually, using the water hardness dial and electronically.
Adjusting the water hardness
setting
manually |
| electronically |
2 |
| level 8 |
2 |
| level 7 |
2 |
| level 6 |
2 |
| level 5 |
1 |
| level 4 |
1 |
| level 3 |
1 |
| level 2 |
1 |
| level 1 |
|
|
|
Use of salt
yes yes yes yes yes yes yes no
Setting the water softener manually (see table)
The water softener is factory set at position 2.
Set switch to position 1 or 2
Setting the water softener electronically (see table)
The dishwasher is factory set at level 5.
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Simultaneously press and hold function buttons B and C until the lights of the func- tion buttons A, B and C start flashing.
3.Press function button A, the lights function buttons B and C turn off while the light of function button A goes flashing, at the same time the end of programme indica- tor light starts to flash, along with a se- quence of intermittent audible signals. The current level is indicated by the number of flashes of the end of programme indicator
10