Cleaning and care
A range of Miele cleaning and conditioning agents is available from the Miele UK Spare Parts Department or via the internet at
Do not use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents. Some scouring agents claim to be
For stainless steel surfaces, use a suitable stainless steel conditioning agent.
Do not let water get into the electronic unit or the light.
Do not let water get into the drainage channel and drain hole when cleaning.
Do not use steam cleaning apparatus to clean the appliance. Steam could reach the electrical components and cause a short circuit.
The data plate located inside the appliance must not be removed. It contains information which is required in the event of a service call.
Before cleaning
^Switch the appliance off, switch off at the socket and remove the plug.
^Take any food out of the appliance and store it in a cool place.
^Take out any removable parts, e.g. shelves, for cleaning.
^The trays and containers in the door can be removed from their stainless steel frames for cleaning.
Cleaning the outer casing, the interior and accessories
Use lukewarm water with a little
^Clean the appliance at least once a month.
^Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered. Use a straw or similar to clear the drain if necessary.
^After cleaning, wipe the outer casing, interior and accessories with a damp cloth and dry with a soft cloth. Leave the doors open to air the appliance for a short while.
^Stainless steel surfaces can be cleaned with a proprietary stainless steel cleaning agent, following the manufacturer's instructions on the packaging.
^After cleaning, stainless steel surfaces should be treated with a conditioning agent for stainless steel.
42
