Changing the door hinging
Before beginning, make sure that the door shelves are empty.
Removing the
^Open the refrigerator door.
^Prise open panel a from the
Take care not to damage the door seal.
If the door seal becomes damaged, the door will no longer close properly and cooling will be impaired.
^Slide panel a towards the appliance, and leave it hanging between the door and the appliance.
^Fit restraining clip b (supplied with the appliance) onto
The restraining clip stops the hinge from snapping shut. Do not remove the clip until told to do so.
^Carefully prise open cover d from above and below using a
^Push hinge pin e up and out from underneath using a
60