Changing the door hinging
^Remove cover d.
The
^ Remove panel a. |
^Slide
^Undo screw g on the
^Using a
^Then prise the base of the
^Place the
^Push the spacer out towards the hinge side.
^Then place the spacer to one side.
Removing the upper door:
^Gently loosen cover h by carefully inserting a
^Remove cover h together with retainer i.
^Then separate retainer i from cover h, by pushing it slightly to the left and then pulling the cover forwards and off.
^Rotate retainer i by 180°.
^Then fit cover h from the front over retainer i, and push it over to the right. The writing must be visible.
^Unscrew hinge part j, turn through 180° and fit to the opposite side. If necessary drill pilot holes for the screws.
^Remove cover k by sliding it forwards from the back and then lifting it off.
^Remove cover l by pulling it upwards.
61
