Changing the door hinging
^Attach panel b to
^Align bracket d to the hinge plate, and insert pin e from above so that the right angle fits into the recess.
^Click cover f back into place.
Make sure that cover f fits properly so that the door can be closed without hindrance and the pin is protected.
^ Remove retaining clip g. |
^Replace panel b onto the
^Close the lower appliance door.
Refitting the upper door:
^Then fit the top door on middle hinge pin i.
^ Close the upper door. |
^Fit hinge plate n onto the opposite side and secure it with screws m. If necessary drill pilot holes for the screws or use a battery operated screwdriver.
^Refit cover k on the opposite side.
^Align the door with the appliance housing using the long slots in the lower hinge plate. Then tighten the screws.
66