Switching on and off
Settings mode
Certain settings on the appliance can only be selected in the settings mode.
How to select the settings mode and how to change the settings is described in the relevant section of these instructions.
Overview of functions that can be selected in the settings mode:
|
| |
To enter or leave the settings | c | |
mode | ||
| ||
|
| |
To switch the sensor tone |
| |
on/off | b | |
(see "Switching on and off") |
| |
|
| |
To confirm that the active |
| |
charcoal filters have been | ^ | |
changed (see "Active charcoal | ||
| ||
filters") |
| |
|
| |
To switch the safety lock on/off | u | |
(see "Switching on and off") | ||
| ||
|
| |
To change the brightness of |
| |
the temperature display | d | |
(see "The correct | ||
| ||
temperature") |
| |
|
| |
To adjust the temperature in |
| |
the PerfectFresh zone | § | |
(see "The correct | ||
| ||
temperature") |
| |
|
| |
To set the water intake time for |
| |
the ice cube maker | e | |
(see "Making ice cubes") |
| |
|
| |
|
|
The door alarm is automatically disabled when the appliance is in the settings mode. As soon as the door is closed, the door alarm is activated again.
Switching the sensor tone on/off
The tone which sounds each time a sensor is touched can be deactivated.
^Touch and leave your finger on the sensor.
^At the same time, briefly touch the On/Off sensor (without letting go of the sensor).
^Leave your finger on the sensor for another 5 seconds until c appears in the display.
^Touch the sensor repeatedly until b appears in the display.
^Touch the On/Off sensor.
^By touching the sensor, you can now select whether the sensor tone is switched on or off:
b 0: Sensor tone is switched off
b 1: Sensor tone is switched on
b
17
