The correct temperature
Setting the temperature
The temperatures in the refrigerator section/PrefectFresh zone and freezer section are set independently of one another.
^Select the refrigerator or the freezer section.
The "Refrigerator" symbol or the "Freezer" symbol will light up yellow.
^You can now use the arrow sensors on either side of the temperature display to set the temperature you require.
By touching the
sensor: the temperature will get colder
sensor: the temperature will get warmer.
The temperature being set will flash in the display.
The following information shows in the display when the sensors are touched:
–Touching a sensor once: the last temperature selected flashes.
–Each subsequent touch of a sensor: adjusts the temperature shown in
1 °C steps.
–Leaving a finger on the sensor: changes the temperature continuously.
When the highest or lowest temperature in the range is reached, the or sensor disappears.
Approx. 5 seconds after taking your finger off a sensor, the average, current temperature of the refrigerator or freezer section is automatically shown.
If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature display, as it will take this long for the display to give an accurate reading. If, after this time, the temperature is still too high or too low, you will need to adjust it again.
Temperature range
The temperature can be adjusted:
–In the refrigerator section from 3 °C to 9 °C
–In the freezer section from
The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperature. If the ambient temperature is too high, the appliance may not reach the lowest temperature.
20