Changing the door hinging
Replacing the upper soft-close door mechanism:
^Remove cover a from panel b, rotate it by 180° and refit it on the other side.
^Insert the spacer into the socket on the handle side (A).
^Then insert the
Push both parts from the middle towards the outside so that they click firmly into position.
^Attach the spacer and the
^Attach panel b to
^Push cover e on from the side so that the openings for the pin f are vertically aligned.
^Align bracket d to the hinge plate, and insert pin f from above so that the right angle fits into the recess.
^Clip cover e into position.
Make sure that cover e fits properly so that the door can be closed without hindrance and the pin is protected.
67